How to Disassemble a Pool Table

How To Disassemble A Pool Table

Disassembling a pool table can be rather easy, providing you possess the right tools in addition to manpower. The instructions listed here are for a standard wood frame home pool table having a slate bed in addition to leather drop pockets. Coin operated tables in addition to non slate tables have different instructions when disassembling.

How To Disassemble A Pool Table

Tools Needed: 9/16″ socket, socket wrench, Philips screwdriver. Marked sandwich baggies to place screws in addition to bolts.

How To Disassemble A Pool Table

Definitions:

How To Disassemble A Pool Table

Rail Assembly: Contains the wooden rail, the cushion or bumpers to which the apron attaches to.

How To Disassemble A Pool Table

Bumpers: The rubber part of the rail. They are covered with felt.

How To Disassemble A Pool Table

Aprons: The wooded segments of which attach to the rail assembly. Can be a permanent part of the rail assembly or can be screwed depending on a new of table.

How To Disassemble A Pool Table

Felt: The cloth of which covers the playing surface in addition to the rail bumpers. Usually of which is usually a 75% woolen 25% nylon blend.

Slate: The playing surface of the pool table. Usually comes in (3) pieces. Can either be wood backed or unbacked.

Frame: The base of the pool table which the slate sits on.

  1. First start off by detaching the pockets by the table itself. Usually the straps of the pockets are attached to the table itself with either screws, staples, nails or glue.
  2. Next using your 9/16″ socket in addition to wrench; remove the rail bolts (12) located underneath each rail. Place the rail bolts in a marked baggie for storage.
  3. Take one section of the rail assembly (2 sides in addition to top/bottom) in addition to flip them over onto the covered bed of the pool table. Unscrew the pocket screws.
  4. Remove pockets by rail assembly in addition to place to side.
  5. Place rails to the side. Some tables you will have to remove the aprons at This specific point.
  6. Remove felt by slate bed. The felt is usually usually either glued down or stapled to the wood backing of the slate. If of which is usually stapled, remove each staple carefully, as not to rip the felt itself.
  7. Remove the slate screws in addition to place in marked baggie. Sometimes all the slate screws will be filled in with either beeswax, Bondo or spackling putty. Carefully remove the product by each hole.
  8. Pull the slates apart in addition to lift each one in addition to place to the side.These are very heavy so please be careful.
  9. Disassemble the frame. Generally, most of the time if you are just moving the table a short distance all of which will be required is usually removing the legs.
  10. Removed the bolt by each leg. Pick table up in addition to remove legs in addition to place to side.

How to Disassemble a Pool Table

Reply